Wavetronix SMARTSENSOR 105 Guide d'installation télécharger pdf (Page 9)

SmartSensor 105 User Guide – Wavetronix LLC 9/20/07 - -

2. Adjust the side-to-side angle to within approximately ±2° of perpendicular to the

flow of traffic.

3. Tighten mounting bracket bolts.

5. Connecting the SmartSensor Cable to SmartSensor

Figure 4 – Attached Cable

1. Attach the cable connector to the 25-pin connector at the base of the SmartSensor

as shown in Figure 4. The SmartSensor connector is keyed to ensure proper

connection; simply twist the connector clockwise until you hear it click into place.

2. Strap the cable to the pole, or run it through conduit to prevent cable strain.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Pas de commentaire

Wavetronix SMARTSENSOR 105 Guide d'installation Page 9