Wavetronix SmartSensor Advance Extended Range (SS-200E) - Qui Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Wavetronix SmartSensor Advance Extended Range (SS-200E) - Qui. Wavetronix SmartSensor Advance Extended Range (SS-200E) - Quick-reference Guide (Installer) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
SmartSensor Advance
INSTALLER QUICK-REFERENCE GUIDE
www.wavetronix.com
801.734.7200
Suggested mounting locations:
1 Near-side vertical pole
2 Near-side luminaire
3 Back-side opposing mast arm
4 Front-side mast arm
2
Identify sensor’s location and pull homerun cable through conduit
1
Ensure that all necessary components are available
e components below, all of which can be ordered from Wavetronix, may be needed to install your sensor;
for more information on any of these, see the Wavetronix product catalog.
Introduction
Complete steps 1–9 to integrate the Wavetronix Advance detection system
into a signalized intersection. If you need technical support or have ques-
tions, please contact Wavetronix Technical Services at (801) 734-7200. For
more information, see the SmartSensor Advance User Guide.
A
A
B
D
C
B
1
3
4
2
50 feet
17 feet
30 feet
Sensor detection coverage:
A SmartSensor Advance
B Detection coverage
C Homerun cable
D Trac cabinet
Mount
brackets
Sensors Sensor
cables
Homerun
cable
Patch
cords
Rack
cards
Preassembled
backplate
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - SmartSensor Advance

SmartSensor AdvanceINSTALLER QUICK-REFERENCE GUIDEwww.wavetronix.com 801.734.7200Suggested mounting locations:1 Near-side vertical pole2 Near-side

Page 2 - Point sensor at target

3 Select the mounting height, attach and point at target1 Determine the mounting height (between 17 and 40 feet is recommended; typical mounting heig

Page 3 - Sensor roll

6 Attach the SmartSensor 6-conductor cable and ground the sensor1 Squeeze about 25% of the silicon dielectric compound into the connector at the base

Page 4 - Complete wiring

WX-500-0168© 2014 Wavetronix LLC. All rights reserved. Protected by US Pat. Nos. 6,556,916; 6,693,557; 7,426,450; 7,427,930; 7,573,400; 7,889,097; 7,8

Commentaires sur ces manuels

Pas de commentaire