Wavetronix SmartSensor Matrix Guide de l'utilisateur télécharger pdf (Page 7)

6 INTRODUCTION  SMARTSENSOR MATRIX USER GUIDE

ration process is quick and easy. Aer installation, the sensor will require little or no on-site

maintenance and can be remotely congured.

is user guide outlines the step-by-step process of installing and conguring the Smart-

Sensor Matrix. Any questions about the information in this guide should be directed to

Wavetronix or your distributor.

SmartSensor Matrix Package

A standard SmartSensor Matrix package may contain the following items:

 SmartSensor Matrix detector(s) with installed sensor backplate

 Sensor mounting kit(s)

 SmartSensor 6-conductor cable(s)

 Intersection preassembled backplate

 Click 112/114 detector rack card(s) with patch cable(s)

 Click 104 four-channel DIN rail contact closure module

 SmartSensor Manager Matrix (SSMM) soware

 SmartSensor Matrix User Guide

Note

Instead of the intersection preassembled backplate, you may be using the Click 600

cabinet interface device, the preassembled 19-inch rack, or the segmented preas-

sembled backplate. The coming chapters will note installation dierences between

these devices and the preassembled backplates where applicable.

SmartSensor Matrix system options include (see Figure I.2):

 AC power conversion – Provides reliable power for the sensors and backplate com-

ponents. is option is normally recommended instead of the DC surge protection

because it will not burden the existing DC power modules.

 Remote IP connection – Provides a way (via a Click 301 serial to Ethernet converter)

to connect to the sensor from a remote location. e Click 301 is recommended for

remote management.

1 2 3 4 5 6 7 8 9 10 11 12 ... 115 116

Pas de commentaire

Wavetronix SmartSensor Matrix Guide de l'utilisateur Page 7