Wavetronix SmartSensor HD (101-0415) - User Guide Manuel d'utilisateur télécharger pdf (Page 83)

82 APPENDIX  SMARTSENSOR HD USER GUIDE

H=7

+DC

Red

A=1

-DC

Black

G=10

232 TX

Yellow

K=11

232 RX

Violet

J=9

232 CTS

Brown

C=9

232 RTS

Orange

F=12

+485

Blue/White

E=6

-485

Blue

D=5

Drain/

shield

Figure A.1 – 10-pin Plug Connector Socket Assignment (seen from the solder cup side of the

connector)

Appendix B - 26-pin Connector

Certain SmartSensor HDs, including the HD legacy, the retrotted HD, and the limited

lane and feature versions, have a 26-pin connector. You can order this connector on two

dierent cables:

 e 8-conductor cable, which is the same cable mentioned above; it can be ordered

with either the 10-pin connector or the 26-pin connector.

 e 9-conductor cable. is cable is composed of three groups of wires, each contain-

ing color-coded wires and a drain wire surrounded by a shield.

See Figure B.1 for a diagram of the 9-conductor cable’s 26-pin socket assignment. e codes

listed in the diagram are to be used to solder wires into the back of the plug where the letters

represent the individual solder cups.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 89

Pas de commentaire

Wavetronix SmartSensor HD (101-0415) - User Guide Manuel d'utilisateur Page 83