Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) Manuel d'utilisateur télécharger pdf (Page 35)

34 CHAPTER 4  WEB-BASED MANAGEMENT (WBM)

save the active conguration or load a new conguration, and to modify them (by entering

a valid password). It can also be used to restart the system with the relevant conguration

(see Figure 4.12).

Figure 4.12 – Conﬁguration Management Web Page

e following are possible states for Status of current conguration:

 e conguration has been modied but not saved.

 e current conguration is saving.

 e current conguration is equal to the one saved in the non-volatile memory of the

switch.

 e current conguration was saved.

Note

If the new conﬁguration is not activated by a reset after a conﬁguration download,

the Save current conﬁguration command overwrites the previously loaded conﬁgu-

ration and instead saves the active conﬁguration of the managed switch.

is option can be used to reset the switch to its default settings (default upon delivery) by

entering a valid password (see Figure 4.13).

Figure 4.13 – Set default upon delivery Window

Note

Web-based management can only be called using a valid IP address. Once the switch

has been reset to its default settings, it has no valid IP address.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Pas de commentaire

Wavetronix Click 342 (lean managed ethernet switch) (CLK-342) Manuel d'utilisateur Page 35