Wavetronix SmartSensor Advance Extended Range (SS-200E) - Use Manuel d'utilisateur télécharger pdf (Page 131)

130 CHAPTER 12  PROGRAMMING CONTACT CLOSURES

Note

For information about how to conﬁgure the Click 112/114, see the Click Series User

Guide or the Click 112/114 Quick-Reference Guide.

Communication via SmartSensor Manager

To setup communication via SmartSensor Manager:

1 From the Channel-Alerts-Zone screen, click on Setup Output Communication.

2 Select Port 2 from the transmit output drop-down list. Port 2 is the data bus and is an

RS-485 port.

3 Select Z4 - Click 112/114 from the output format drop-down list to set up communica-

tion with a Click 112/114.

4 Click OK to save the communication changes.

5 Verify that detections are registering on the rack card and close SmartSensor Manager

if you are connected over the data bus.

Figure 12.1 – Setting Output Communications Using SmartSensor Manager

Click 172/174 Contact Closure Cards

e Click 172/174 cards are simple to program and require little on-site maintenance (see

Figure 12.2).

Note

The SmartSensor Advance Extended Range only works with the Click 112/114/104

card. It does not work with the Click 172/174/100 cards.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 147 148

Pas de commentaire

Wavetronix SmartSensor Advance Extended Range (SS-200E) - Use Manuel d'utilisateur Page 131