Wavetronix SMARTSENSOR 105 Guide de l'utilisateur télécharger pdf (Page 83)

82 CHAPTER 8  ZONES & CHANNELS

When you enter the Zones & Channels tab and you haven't yet congured any zones, you

will be prompted to add auto zones (see Figure 8.2). If you click Yes, a zone will be placed

in each congured lane. Lanes and stop bars must be dened before you can add auto zones.

Note

Lanes and stop bars must be deﬁned and saved before you will be able to add auto

zones.

Figure 8.2 – Auto Zones

If you enter a negative number in the Distance from stop bar: eld, the zone will be placed

after the stop bar. To add a negative distance from the stop bar, make the distance 0, high-

light the whole eld and then click the down arrow once.

You can add a zone up to 100 ft. past the stop bar and a zone can be anywhere from 5 to

100 ft. long.

Menu Bar

e menu bar on the bottom of the screen allows you to make changes to the zones and

channels. Click the button at the right side of the menu bar to see a window with menu

descriptions (see Figure 8.3).

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 106 107

Pas de commentaire

Wavetronix SMARTSENSOR 105 Guide de l'utilisateur Page 83