Wavetronix SMARTSENSOR 105 Guide de l'utilisateur télécharger pdf (Page 86)

CHAPTER 8  ZONES & CHANNELS 85

Normal Channel

e normal channel detects presence in the zone. is means that as soon as the leading

edge of the vehicle breaks the plane of the leading edge of the zone, the channel will be

activated (see Figure 8.7).

Channel LED

Pulse

Channel LED

Figure 8.7 – Normal Channel

If there are no delay or extend settings, the zone will remain activated until all cars have

exited the zone.

Counting Channel

A counting channel counts each vehicle that passes through the zone. e channel is acti-

vated once the middle of the vehicle crosses the leading edge of the zone (see Figure 8.8).

Channel LED

Pulse

Channel LED

Figure 8.8 – Counting Channel

Once you select a counting channel type, the delay and extend settings will be disabled.

Pulse Channel

A pulse activates the channel for a very short period of time once the front edge of the ve-

hicle crosses the leading edge of the zone (see Figure 8.9). You can congure how long you

would like the pulse to be by changing the pulse channel width setting (see Figure 8.13). A

new pulse will only be sent after a car enters a zone when the zone is empty.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 106 107

Pas de commentaire

Wavetronix SMARTSENSOR 105 Guide de l'utilisateur Page 86